Here is a pic of my Spyder. The bottom pic shows the view you have with a Warp Feed mounted on it. The stats of this marker is as follows...

• Original Full Size Body Style Spyder (1996)
• J&J Ceramic 14"
• AKA Lightenting Bolt
• AKA Rear Cocking Rod
• Home Made Quick Disconnect Pin
• Diamond Labs LP Valve
• ACI LPC
• Lapco Vertical Adaptor
• Air America Vigilante (set at 350psi)
• Quick Disconnect on SS Air Line
• Benchmark Dropforward with On/Off ASA
• 32degree Spring Kit
• Warp Feed
• 12v Revi.



---








Here is a pic of my Spyder. The stats on this marker is the following...

• Spyder SE Compact body (1998)
• SP Teardrop 12"
• Stock bolt with modifications
• Field Strip Screws
• Diamond Labs LP Valve
• Bob Long Vertical Adaptor
• Bob Long Power Regulator (set at 375psi)
• Quick Disconnect on SS Air Line
• KAPP 6" drop forward
• ACI DuckBill ASA
• Pure Energy 68cu 3,000psi tank
• Maddman Spring Kit
• 12v Revi
• Boo-Yaah eLCD



---






Here is an AMG Classic. The picture above is what it looks like stock. I have yet to get updated pics of it since I have done some modifications to it. I will write what I have and work on getting a picture of it.

• AMG Classic
• CheckIt Full Force Bolt
• Rocket Valve
• Dark Horizon Striker with Otter Mod
• KAPP Gauge
• Smart Parts All American Barrel
• IS Board
• Spyder Venom Vertical Adaptor



---






This is basically my testing marker for new products that I mention in my articles like Project LP. But, will throw it together and use as a backup.

• Spyder 2-in-1
• AKA Bolt
• Polished internals
• ESP frame w/ T-Board
• Lapco bottomline converter
• Velocity wheel from a Pirhana
• KAPP Apocolypse Dropforward
• Air America Vigilante Regulator
• 32Degree spring kit
• Smart Parts Teardrop barrel



---










A small project that I did. More pictures can be found using this link. The top two pictures shows the holsterable setup. The third picture shows the bottomline setup.

• Spyder Compact 2k
• Modified valve
• Stock Kingman barrel
• Custom "VA"
• ASA to 1/8" NPT adaptor
• Steel braid air line and fittings



---








Here is a first generation Brass Eagle Nightmare that I have. It was made back when paintball was still a babe. It uses one 12g CO2 cartridge (loaded in the top back tube) and holds 10 paintballs (loaded in the top front part of the tube). You need to pump after every shot. The refurbishing and wooden grips were done by Masses Machine Co., Inc. He can do custom work and has made his own paintball marker. If you want some custom grips or custom work done to your marker, he may be able to do it. Just e-mail Jim and ask to see if he can do it. He specializes in stock class and old pumps.




---










The top picture is a direct feed Phantom with all the bells and whistles. Sound suppressor, fully adjustable bi-pod, 9v revy, N2 tank, nightscope, and a autococking device. It is really more of a joke setup. The second picture is that of the Stock Class version. The last one is that of the gauge that I mounted.

• Phantom w/ 45 frame
• - Purple stock class breech/10rnd feed, VA and bottom line back
• - Black direct feed w/ back bottle back
• Lapco Ghost lightened hammer
• Simmons red dot sight
• CCI 14" barrel - black
• CCI 8" barrel - purple
• KAPP gauge - tapped and mounted on bottom line back



---








Another great marker. This is really a KP3 that I had converted to stock class. Absolutely wonderful work from Masses Machine. Notice the speed loader. Stick the 10-round tubes in, press the leaver, and the balls enter the magazine and remove the tube. Or, just leave the tube in place until more balls are needed.




---






This is my collection of PGP's and the Nightmare. I do not have all of these PGP's anymore. Currently, I still have the 2k model, 3 of the older ones (brass), and of course the Nightmare.




---








A 2002 Vertical Feed AutoCocker. Pretty much upgraded everything. The only thing stock is the body and beavertail.

• 2k2 Vertical AutoCocker
• Shocktech Bomb 3-way
• ACM Ram
• ANS Jackhammer Pneumatic regulator
• ACI Pneumatic hose
• Maddman Springs
• Maddman Rocket Valve
• SS Quick Disconnect pin
• Air America Vigiilante w/ LP spring
• KAPP Gauge (mounted on pneumatic block)
• KAPP Reflex trigger
• KAPP On/Off ASA w/ braid line and quick disconnect
• KAPP Twisted cocking rod
• No name drop forward
• Longbow Barrel (.684 & .687 bores w/ 10" LP Tip)
• Lapco Bigshot (.690)



---






I had gotten this off of ebay as a tester/fixer AutoCocker. Came with a Boomstick, upgraded pneumatics and RAT3:16 valve. I sold off the pneu's and added a pump kit from White Wolf Customs.

• 2000 AutoCocker
• 14" Boomstick
• 2k3 bolt
• RAT 3:16 valve
• Pump kit



---






Here is the AutoCocker that I built from scratch and documented in my building from scratch article. It has all fairly high quaility parts, being short of making it an electro. Yet, I believe is better than the high priced Cockers that are double the price than what I spent.

• 2k body style from Advanced Concepts (ebay)
• KAPP Reflex Chrome trigger frame
• 32Degrees Hammer
• 32Degrees Velocity Adjustor
• 32Degrees Spring Kit
• Turtle Cocker Valve
• KAPP Valve Retainer
• ShockTech SuperFly Bolt
• Stock WGP Actuating Rods
• ANS Jackhammer II Reg
• Belsales Hollowpoint 3-way
• STO RAM
• KAPP Translucent Red Pneumatic Air Line
• KAPP Twisted Rear Cocking Rod
• KAPP Beaver Tail
• WGP Ergo In Line Regulator (set at 200psi)
• Stainless Steel Air Line with Quick Disconnect
• KAPP Apocolypse Drop Forward w/ On/Off ASA
• Titanium Paintball Longbow Barrel System
• Lapco BigShot Barrel (shown)



---








The last of the Cocker family that I will be doing. This is a continuation of my customizing series of this particular brand of marker. I had stated in my last article that I will try to utilize the Turtle Cocker design. I also decided to make it electro. The 2nd Custom Cocker article covers much of the same as the first one, with a few tips and tricks that I had not mentioned.

• 2k body style from Advanced Concepts (ebay)
• Eclipse E-Blade
• Turtle Cocker Valve
• Turtle Cocker Hammer
• 32Degrees Spring Kit
• Turtle Cocker Velocity Adjustor
• KAPP Valve Retainer
• Turtle Cocker Bolt/Backblock
• WGP Tickler Pneumatic Reg
• RAM with QEV's
• KAPP Translucent Red Pneumatic Air Line
• Smart Parts Maxflo InLine Regulator (set at 200psi)
• Macroline
• KAPP Apocolypse Drop Forward w/ On/Off ASA
• Titanium Paintball Longbow Barrel System